1.Each kit contains 30 test devices, each sealed in a foil pouch with three items inside:

2.a. One cassette device.

b. One plastic dropper.

c. One desiccant.

3.One package insert (instruction for use).

Step 1: Bring the specimen and test components to room temperature if refrigerated or

frozen. Mix the specimen well prior to assay once thawed.

Step 2: When ready to test, open the pouch at the notch and remove device. Place the test device on a clean, flat surface.

Step 3: Be sure to label the device with specimen’s ID number.

Step 4: Fill the pipette dropper with the specimen. Holding the dropper vertically, dispense 2-3 drops (about 60- 90 µL) of specimen into the sample well making sure that there are no air bubbles.

op of whole blood (about 40-50 µL) into the sample well.

Then add 1 drop (about 35-50 mL) of Sample Diluent immediately.

Step 5: Set up timer.

Step 6: Results can be read in 10 minutes. Positive results can be visible in as short as 1 minute.